MLLT1

MLLT1

 

Protects Up One T1 or ISDN Line per Port Using RJ-48C/48S Connectors. T1/LL- 2-Pairs (Pins 1, 2 & 4, 5); ISDN – BRI/PRI Compatible.
Applications: T-1, ISDN.
(*Made in USA of U.S. and imported parts.* )

Specification Sheet Product Installation Instructions

TECHNICAL SPECIFICATIONS

PRODUCT SPECIFICATIONS

  • Agency Approval UL 497A (Secondary)
  • Grounding Requirements Uses Electrical AC Ground
    for use with SurgeGate Series AC Base Units
    (See Technical Reference page 83-84 for additional grounding tips.)
  • Recommended Grounding Impedance <0.5 0hm
  • Width/Height/Depth/Weight 4.25” / 4.25" / 1.5" / 0.43 lbs
  • Product Warranty 5 years
  • Connected Equipment Warranty Up to $50,000

SINGLE LINE SURGE PROTECTION: (TELCO)

  • Signal Perfect Circuitry Yes
  • Auto-Resetting PTCs 160 mA (8-10 Ohms)
  • Clamping Level 70V
  • Response Time 1-5 Nanoseconds
  • Capacitance <50pF
  • Suppression Modes Metallic & Longitudinal
  • Wires Protected 4-wires, 2-pairs per jack (pins 1, 2 & 4, 5)
  • Termination Type RJ-48C or RJ-48S
MLLT1

FEATURES

  • Auto-Resetting Technology PTC resistors open when a surge occurs, protecting your equipment, but unlike other fuses, the PTCs close again once the surge passes. Less downtime, and less service calls
  • Expandable System Protection SurgeGate Modules can be attached to one another to expand system protection as your system grows
  • 5 Year Product Warranty This surge protector shall be free of any defects in design, materials, or workmanship, or ITW Linx will repair or replace the defective product
  • $50,000 Connected Equipment
MLLT1