CAT6A-75

 

TECHNICAL SPECIFICATIONS

PRODUCT SPECIFICATIONS

  •  Primary and Isolated Loop 
  • Grounding Requirements Uses Electrical AC Ground 
    for use with Surge Gate Series AC Base Units 
    (See installation instructions for additional grounding information)
  • Recommended Grounding Impedance <0.5 0hm
  • Width/Height/Length (with flange) 4.25” / 4.25" / 1.5"
  • Weight w/o Modules 0.42 lbs.
  • Product Warranty 5 years
  • Connected Equipment Warranty Up to $50,000

SINGLE LINE SURGE PROTECTION: (PoE,PoE+,PoE++)

  • Signal Perfect Circuitry Yes
  • Fused Yes
  • Performance Rating CAT6A
  • Clamping Level 75V
  • Response Time 1-5 Nanoseconds
  • Capacitance <2pF
  • Operating Temperature: (-40ºF to 158ºF) (-40ºC to 70ºC)
  • Wires Protected 4-pairs
  • Termination Type 110 Punchdown
 

FEATURES 

  •  Primary and Isolated Loop applications
  • Exceeds TIA/EIA Standards 568 and 758 for CAT6A performance
  • Solid-state protection provides the fastest response
  • Use between buildings in a campus environment as a building entrance protector or in hostile industrial applications as an isolated loop protector
  • Expandable System Protection – Surge Gate Modules can be attached to one another to expand protection as your system grows
  • 5 Year Product Warranty – This Surge Protector shall be free of any defects in design, material, or workmanship, or ITW LINX will repair or replace the defective product
  • 75V Clamping Voltage
  • POE, POE+,POE++