Location C

LOCATION C – FIND PRODUCTS FOR YOUR SYSTEM

See the info below to find out which product is suitable for your application.

Product Finder

LOCATIONS

Choose one of the locations that you would like to find out more about.

  1. Using Modular type of input for Analog lines leaving system – (LOCATION C)


    -SUGGESTED PRODUCTS-
    • MCO4110-Click here for specification-

      MCO4110: This Modular Protector Protects Up to 8- Wires (4-pairs) Using 110 Punchdown Block on the Input and 110 Punchdown Block or Four RJ-11 or Two RJ-45 on the Output. UL 497A Secondary Protector Approval.

    • MCO8110-Click here for specification-

      MCO8110: This Modular Protector Protects Up to 16-Wires (8-pairs) Using 110 Punchdown Block on the Input and 110 Punchdown Block on the Output. UL 497A Secondary Protector Approval.
    • MCO25-Click here for specification-

      MCO25: This Modular Protector Protects 25-Pairs Using RJ-21X (Amphenol) Connectors (Pins 1-50, Male In / Female Out). UL 497A Secondary Protector Approval.

    • MCO4-Click here for specification-

      MCO4: This Modular Protector Protects up to 4-Wire (2-Pairs) per Jack. Using RJ-11/45 Connectors (2 In or 2 Out, Pins 3 & 6 and 4 & 5 Protected). UL 497A Secondary Protector Approval.

    • MCO4x4-Click here for specification-

      MCO4X4: This Modular Protector Protects up to 2-Wire (1-Pair) per Jack. Using RJ-11/45 Connectors (Pins 4, 5). UL 497A Secondary Protector Approval.

  2. Using 66 Block type of input for Analog lines leaving system – (LOCATION C)


    -SUGGESTED PRODUCTS-
    • UP3B-Click here for specification-

      UP3P-(27 / 39 / 75 / 235): 66 Block, Solid-State, UL Listed Secondary Protector, 160mA PTC, 2 LEDs to Indicate Protection and Ground OK. (27V / 39V / 75V / 235V Clamping).

  3. Using Modular type of input for Digital lines leaving system – (LOCATION C)


    -SUGGESTED PRODUCTS-
    • MDS25-Click here for specification-

      MDS25: This Modular Protector Protects Up to 25 2-Wire or Up to 12 4-Wire Digital Stations Lines Using RJ-21X (Amphenol) Connectors (Pins 1-50, Male In / Female Out). UL 497A Secondary Protector Approval.

  4. Using 66 Block type of input for Digital lines leaving system – (LOCATION C)


    -SUGGESTED PRODUCTS-
    • UP3B-Click here for specification-

      UP3H-(75 / 235): 66 Block, Solid-State, UL Listed Secondary Protector, 160mA PTC, 2 LEDs to Indicate Protection and Ground OK. (75V / 235V Clamping).